LM4670ITL/NOPB Overview

There is a device embedded in 9-WFBGA, DSBGA .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 9 termination.1-Channel (Mono) is the output configured for it.The device is of type Class D .The 9 pins are pronged contacts which are part of a signal interface in a computer or other communication device.Electronic parts are mounted in the way of Surface Mount .Amp parts is powered by a voltage of 2.4V~5.5V volts.1 channels are present on the device.Operation can be ensured by Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown .A temperature greater than -40°C~85°C TA should not be used.There are 9 pins present on this device.This is a member of the LM4670 family.The electronic part is mounted in the way of Surface Mount .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 3W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.4V .This electronic part has a Single supply type.This is a member of the Boomer® series.

LM4670ITL/NOPB Features

9-WFBGA, DSBGA package
9 pin count
LM4670 family
3W kWh per hour
Boomer® series

LM4670ITL/NOPB Applications

There are a lot of Texas Instruments
LM4670ITL/NOPB audio amplifiers applications.

• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation
• Video and image computer boards
• Medical instruments
• Television broadcasting equipment