LM5021NA-1 Overview
8-DIP (0.300, 7.62mm) is the package in which the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.It is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.As a result, the switching frequency reaches Up to 1MHz .Vcc/Vdd can be used within the range of 8V~30V supply voltage.In total, it has 8 terminations.The ac/dc converter has a total of 8 pins.The pins of the ac-dc converter count up to 8 .Through Hole is a suitable mounting point for the ac dc converters.A similar acdc converter can be searched by using the LM5021 family.There are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .Current output is set to 700mA .The voltage output by this AC/DC converter is 8.5V .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 30V .
LM5021NA-1 Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 700mA
LM5021NA-1 Applications
There are a lot of Texas Instruments LM5021NA-1 AC DC Converters applications.
- Adapters for Handheld Electronics
- Small off-line low voltage power supplies
- IoT Applications
- Industrial controls
- USB type-c v1.2 chargers with optional VDM
- Standby Power Supplies
- AC/DC Adaptors/Chargers for PDAs
- Standby power supplies for VCR
- Tablets
- Standby Power for General Off-Line Applications
