LM5085QMYE/NOPB Overview

The switching controller fits in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. For outputs of 1, this dc motor controller is suitable. There is a Cut Tape (CT) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 4.5V~75V and has a 4.5V~75V supply voltage. Qualified to work in an dc switcher with -40°C~125°C TJ. Using this switching controller, it is possible to switch at Up to 1MHz. A generalization of dc dc regulator can be made using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, On Time Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. An array of 8 terminations of dc switching. It is inputted with a DC switcher's voltage of 48V. Searching "LM5085" will return other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 75V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1.75A. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. 1MHz is the maximum frequency of this dc regulators. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. In dormant mode, 1.3mA is used. Since the dc switcher's maximum input voltage is 75V, the voltage must be regulated accordingly. A voltage of 4.5V is required for the supply. There will be 1.75A output current greater than 1.75A from the dc switcher. The voltage controller's lowest voltage output is not less than 1.25V.

LM5085QMYE/NOPB Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control
Max Duty Cycle: 100 %

LM5085QMYE/NOPB Applications

There are a lot of Texas Instruments LM5085QMYE/NOPB DC to DC converter applications.

• Electric heating, lighting
• Laboratories
• Experimental setup
• Flaw detection equipment
• Refrigerators of central air conditioners
• Large fire protection systems
• Sensitive electronic devices
• Textile machinery
• Industrial controllers
• Television equipment