LMC6064IN Overview
Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 14 terminations in the next few months. In total, there are 14 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 14 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 100μV voltage. For this electronic part, it is recommended that you mount it with type Through Hole. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 80μA, this op amp ic can operate. Keeping the voltage gain at 132.04dB is the best course of action. 4 channels are available on the instrumentation amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages.
LMC6064IN Features
14 Pins
supply voltage of 5V
132.04dB voltage gain
Output Type: Rail-to-Rail
LMC6064IN Applications
There are a lot of Texas Instruments LMC6064IN Instrumentational OP Amps applications.
- Proportional operation circuits
- Medical instruments
- Car stereo
- Comparator
- Large motor controllers
- High gain DC amplifier
- Integrator circuits
- Radar
- Professional videography
- Inverse/same-phase proportional circuit
