Welcome to Hotenda.com Online Store!

logo
userjoin
Home

LMC6464BIMX

LMC6464BIMX

LMC6464BIMX

Texas Instruments

75mA per Channel 0.15pA 65 dB Instrumentational OP Amps 0.00001μA 3V~15.5V ±1.5V~7.75V LMC6464 14 Pins 14-SOIC (0.154, 3.90mm Width)

SOT-23

LMC6464BIMX Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e0
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 235
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
[email protected] Reflow Temperature-Max (s) 30
Base Part Number LMC6464
Pin Count 14
Output Type Rail-to-Rail
Number of Elements 4
Power Supplies 3/15V
Operating Supply Current 90μA
Nominal Supply Current 90μA
Output Current 75mA
Slew Rate 0.028V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 0.15pA
Voltage - Supply, Single/Dual (±) 3V~15.5V ±1.5V~7.75V
Output Current per Channel 75mA
Input Offset Voltage (Vos) 250μV
Gain Bandwidth Product 50kHz
Unity Gain BW-Nom 50 kHz
Voltage Gain 129.54dB
Average Bias Current-Max (IIB) 0.00001μA
Power Supply Rejection Ratio (PSRR) 65dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 16V
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.00001μA
Height Seated (Max) 1.75mm
Length 8.65mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $10.657585 $10.657585
10 $10.054325 $100.54325
100 $9.485213 $948.5213
500 $8.948314 $4474.157
1000 $8.441806 $8441.806
LMC6464BIMX Product Details

LMC6464BIMX Overview


There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 14. In this case, there are 14 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 250μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 90μA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 129.54dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There are 4 elements in total in this linear amplifier. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.

LMC6464BIMX Features


14 Pins
supply voltage of 5V
129.54dB voltage gain
Output Type: Rail-to-Rail

LMC6464BIMX Applications


There are a lot of Texas Instruments LMC6464BIMX Instrumentational OP Amps applications.

  • Weak signal detection
  • Vehicle electronics
  • pH (acidity)
  • Scintillation detectors
  • Commercial audio systems
  • RF cable systems
  • earphone
  • Video conversion and routing
  • Strain gauges
  • Multiplication circuits

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News