LMC8101MM/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. Please take in mind that this instrumentation amplifier should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 700μV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 1.1mA . Keeping the voltage gain at 102.8dB is the best course of action. There are 1 channels on the operational amplifiers. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 5V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.
LMC8101MM/NOPB Features
8 Pins
supply voltage of 5V
102.8dB voltage gain
Output Type: Rail-to-Rail
LMC8101MM/NOPB Applications
There are a lot of Texas Instruments LMC8101MM/NOPB Instrumentational OP Amps applications.
- Tablets
- Measurements of Wheatstone bridge
- Logarithmic operation circuits
- Biopotential
- ECG equipment
- Industrial control system
- Commercial audio systems
- High-frequency data acquisition systems
- High input resistance broadband
- Laptop
