LMP7300MAX/NOPB Overview

To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Open-Collector, TTL output on this device.The chip is packaged with Tape & Reel (TR) .The device is designed with 8 terminations.The chip belongs to Comparator .Electronic comparator can be classified as a with Voltage Reference chip.There are a total of 1 elements in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search LMP7300 .A quiescent current of 13μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 13μA supply current.If the current supply exceeds 13μA , the comparator might be damaged.Input current to the device cannot exceed 3nA .The part is based on LMP®, PowerWise® .Comparator electronics is acceptable to pack the device by TR .

LMP7300MAX/NOPB Features

CMOS, Open-Collector, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 13μA

LMP7300MAX/NOPB Applications

There are a lot of Texas Instruments
LMP7300MAX/NOPB linear comparators applications.

• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications
• Limit Comparators