Welcome to Hotenda.com Online Store!

logo
userjoin
Home

LMS1487IMX/NOPB

LMS1487IMX/NOPB

LMS1487IMX/NOPB

Texas Instruments

5V 8 Pin LMS1487 Receivers1 Bits 1/1 Drivers/Receivers1 Functions

SOT-23

LMS1487IMX/NOPB Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
ECCN Code EAR99
Type Transceiver
Terminal Finish Matte Tin (Sn)
Subcategory Line Driver or Receivers
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
[email protected] Reflow Temperature-Max (s) 40
Base Part Number LMS1487
Pin Count 8
Operating Supply Voltage 5V
Power Supplies 5V
Nominal Supply Current 500μA
Data Rate 2.5Mbps
Differential Output YES
Protocol RS422, RS485
Input Characteristics SCHMITT TRIGGER
Number of Drivers/Receivers 1/1
Driver Number of Bits 1
Receiver Number of Bits 1
Duplex Half
Receiver Hysteresis 95mV
Receive Delay-Max 200 ns
Transmit Delay-Max 60 ns
Output Low Current-Max 0.004A
Number of Transmitters 1
Length 4.902mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
LMS1487IMX/NOPB Product Details

LMS1487IMX/NOPB Overview


LED drivers with the enhanced 8-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.The Tape & Reel (TR) package contains this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.A differential driver like this uses 4.75V~5.25V of power.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.An operating voltage range of 5V is suitable for this line driver ic.It is packaged with 8 pinouts that are market standard for this particular transceiver.Since the base part number LMS1487 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver IC with improved power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.It provided a 1-bit resolution capability with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.Using an antenna, there are 1 transmitters, which produce radio waves in order to transmit or send data.

LMS1487IMX/NOPB Features


Tape & Reel (TR) package
8 pin count
8 pins
5V power supply

LMS1487IMX/NOPB Applications


There are a lot of Texas Instruments LMS1487IMX/NOPB Drivers/Receivers/Transceivers applications.

  • Desktop radio
  • Carrier phase observations
  • LAN, SAN, WAN (local, storage, work area networks)
  • Cordless telephone
  • Data center
  • TV signal transmission
  • Gigabit Ethernet
  • SONET/SDH Network
  • Wireless transmission
  • Fiber distributed data interface (FDDI)

Related Part Number

MC145406D,518
MC145406D,518
$0 $/piece
ATA6620N-TAQY
TRSF23243CDL
DS33R11
DS33R11
$0 $/piece
TPIC1021DRG4
SN75LVDS31PWR
MAX202IPWRE4
SN65LVDM051PWRG4

Get Subscriber

Enter Your Email Address, Get the Latest News