LMS3635AQRNLTQ1 Overview

As a result of the use of the Tape & Reel (TR) package, the performance of this voltage regulator is optimized. In this voltage regulator, there are 22 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Space-saving 22-VFQFN Exposed Pad packages are available for this harley voltage regulator. The voltage regulator is configured with 1 outputs. There are output pins on this DC DC switching regulator that generate Adjustable output. The voltage regulator 12v fits the Surface Mount, Wettable Flank mounting hole. -40°C~125°C TA should be the operating temperature when voltage regulator is operating. This DC-DC switching regulator has a switching frequency of 250kHz~500kHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1V. This voltage regulator 12v offers maximum design flexibility with an output current of 3.5A. There is a maximum input voltage of 36V for this voltage regulator 12v. Its 260 peak reflow temperature makes this regulator essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 13.5V. DC/DC regulators of this type are part of the LMS3635 family of voltage regulator 12vs. Voltage of voltage regulator can be delivered at 15V volts. For switching regulator operation, 22 pins are used. The switching DC-DC regulator belongs to the Automotive, AEC-Q100 family of electronic voltage regulator 12vs.

LMS3635AQRNLTQ1 Features

1 outputs
Peak reflow temperature (Cel) of 260
22 pins

LMS3635AQRNLTQ1 Applications

There are a lot of Texas Instruments LMS3635AQRNLTQ1 Voltage Regulators applications.

• Special machining machine tools
• Wind power
• Electric water heaters
• Injection molding machinery
• Balance equipment
• Low output voltage switching power supply circuits
• Combined machine tools
• Experimental setup
• Industrial controllers
• Computed tomography (CT)