LP3470IM5-2.93/NOPB Overview

This power management consists of 5 mounting terminals on which it can be mounted. There is a Cut Tape (CT)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 2.4V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. There are a total of 5 pins on power management. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least 500mV for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 16μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by LP3470.

LP3470IM5-2.93/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current

LP3470IM5-2.93/NOPB Applications

There are a lot of Texas Instruments LP3470IM5-2.93/NOPB Voltage Supervisors applications.

• Automotive power systems
• Refrigeration
• Battery cars
• Power distribution systems of ICU
• Important electronics for automotive safety
• Microprocessor system
• Radio
• Rechargeable batteries
• Microcontroller system
• Electric heating appliances