LP3470IM5-4.63/NOPB Overview

It is mounted through 5 terminals on the power management. A Cut Tape (CT) package is used to package the power management. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. A supply voltage of 2.4V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 5. 5 pins are on the supervisor. Supply voltage (Vsup) should be at least 500mV for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TJ . The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supply current of the power management is 16μA. To find similar IC managements from the manufacturer, you can always search by LP3470.

LP3470IM5-4.63/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current

LP3470IM5-4.63/NOPB Applications

There are a lot of Texas Instruments LP3470IM5-4.63/NOPB Voltage Supervisors applications.

• Important electronics for automotive protection
• Multi-voltage system
• Low voltage/high power - AI, GPU
• Insulation fault location system
• Smartphones
• Power distribution systems of CCU
• Telecommunications equipment
• Leakage protection
• Detection of phase loss
• Kitchen appliances