LP3470IM5X-2.93/NOPB Overview

There are 5 terminals connected to this power management, which makes it easy to mount. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. A total of 5 pins are located on this power management. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 500mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TJ. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 16μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to LP3470, the base PMIC number.

LP3470IM5X-2.93/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current

LP3470IM5X-2.93/NOPB Applications

There are a lot of Texas Instruments LP3470IM5X-2.93/NOPB Voltage Supervisors applications.

• Set top box
• Detection of phase imbalance
• Smartphones
• Leakage current detection
• Power distribution systems of ICU
• Network equipment
• Radio
• FPGA design
• Power communication system
• Embedded computing