LP38798SDE-ADJ/NOPB Overview

In the case of Tape & Reel (TR) cases, the regulater IC is delivered. In order to package the IC voltage regulator, a 12-WFDFN Exposed Pad case is used. There are 12 terminations on the battery regulator IC chip and each of them has its own function. Regulator IC chip's output type is Adjustable. This part implements 1 regulator ICs, which can be found in the following table. Regulator IC varies the range of Surface Mount operating temperatures. In order for this IC voltage regulator to operate, the temperature has to be kept at -40°C~125°C degrees. It is configured for output function Positive on this regulator. In order to ensure prompt, adequate, and prompt performance, this regulator has 1 outputs in total. Its dropout voltage is 10 volts. The regulator IC has 12 pins. It is LP38798 for this voltage regulator IC, just for your information. The component shown here is a typical Other Regulators component. In order to pack the regulator, the method is TR. Upon reaching its maximal output current, 800mA, it is able to satisfy the operation requirements. It operates in the 2.2mA Quiescent Current state. The top supply voltage is 20V volts.

LP38798SDE-ADJ/NOPB Features

200mV dropout voltage
Other Regulators subtageroy
TR method of packing

LP38798SDE-ADJ/NOPB Applications

There are a lot of Texas Instruments LP38798SDE-ADJ/NOPB Linear Voltage Regulators applications.

• Noise filters

• Car sunroof

• Engine management

• Automated test equipment

• CPU power supply

• SCP configurator

• Measurement and control euipment

• Fuel injector

• Voltage tracker protection circuits

• HVAC (Heating, Ventilation, and Air Conditioning)