LP39542RL/NOPB Overview

Board space is saved by its 36-WFBGA, DSBGA package.LED drivers designed using this technology use 13 outputs.We are using Surface Mount as the mounting method.The system emerges as a DC DC Regulator with high efficiency.The led light driver can work at -30°C~85°C TA.Backlight, Camera Flash has many benefits.In this case, the termination value is 36.This configuration is built upon 36 pins.There may be undetermined failures if the voltage supply falls below 3V.There is a mounting of it by Surface Mount.Under the base part number LP39542, you will find this LED driver.It is acceptable to operate with a supply voltage of 5.5V.Its output voltage is 4V~5.3V.Further, its characteristics allow it to be classified as Display Drivers.The minimum input voltage for this device is 3V.It works with the minimal supply voltage of 2.7V to meet highest efficiency standards.7.2V is the maximum value of supply current that can be used.If the maximum current supply is less than 1mA, this device provides high efficiency.You can supply 400mA current to the load.This electronic component can fully perform when the switching frequency is 2MHz.

LP39542RL/NOPB Features

Available in the 36-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Switching frequency of 2MHz

LP39542RL/NOPB Applications

There are a lot of Texas Instruments LP39542RL/NOPB LED Driver ICs applications.

• Replacement lamps
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Museum lighting
• Refrigeration lighting
• Constant Voltage Power Source for portable equipment
• Sports Facility Lighting
• Panel lighting
• OLED power supply for portable equipment
• Other Electronic Devices
• Industrial LED Lighting: Image Recognition Devices