LP8550TLX-A/NOPB Overview

To save board space, it uses the 25-WFBGA, DSBGA package. LED drivers have a total of 6 outputs that are used in the design of the drivers.The led driver mounting is done by using Surface Mount.This emerges as a DC DC Regulator with high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -30°C~85°C TA.Backlight, Lighting provides many benefits.It operates with 25 terminations.With a base of 25, this LED light driver is configured.It is possible that failures will occur if the voltage supply is below 2.7V.A total of 6 segments have been created.Surface Mount is mounted in the way.It can be found under the part number LP8550.It is acceptable to operate with a supply voltage of 22V.It has a voltage output of 40V.Initially, it accepts a voltage of 5.5V.When the maximum supply current is allowed, it reaches 22V.This electronic component can fully perform its functions when the switching frequency is kept at 1.25MHz.Voltages above 40V should not be allowed.

LP8550TLX-A/NOPB Features

Available in the 25-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 12V
Switching frequency of 1.25MHz

LP8550TLX-A/NOPB Applications

There are a lot of Texas Instruments LP8550TLX-A/NOPB LED Driver ICs applications.

• Museum lighting
• Portable lighting
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Sports Facility Lighting
• Street lighting
• Down lighting
• Linear fluorescent
• Medical surgery lighting
• Auxiliary lights for on-vehicle cameras
• A- lamps