The 32-PowerLQFP package is used for saving board space. LED drivers are designed with 4 outputs.The led driver mounting is done by using Surface Mount.With high efficiency, it appears as a DC DC Controller.It is possible for the led driver ic to function normally at -40°C~125°C TA.There are considerable benefits for Automotive, Backlight, Lighting.100kHz~2.2MHz is the frequency in which it operates.32 terminations are designed for its operation.With 32 pins at the base, this LED driver has a base configuration.A voltage supply less than 3V could result in undetermined failures.The number of segments is estimated to be 8.There is a device mounted on the Surface Mount.It is under the base part number LP8860 that you can find this LED driver.The voltage of 48V can be supplied.Initially, it accepts a voltage of 3V.5.5V is the maximum value of supply current that can be used.This device is able to provide high efficiency when the maximal supply current should be less than 15mA.150mA is the maximum current the load can handle.This electronic component may perform its functions fully if the switching frequency is maintained at 2.2MHz.When operating with a 150mA output current, the LED driver delivers all the benefits.There are many applications for this LED driver belonging to the Automotive, AEC-Q100 series.In the absence of external factors, 2.5mA current is consumed.It is important to keep the output voltage below 40V.The voltage it outputs stays at 16V.
LP8860AQVFPRQ1 Features
Available in the 32-PowerLQFP package Operating temperature of -40°C~125°C TA Frequency of 100kHz~2.2MHz Supply voltage of 3.3V Switching frequency of 2.2MHz
LP8860AQVFPRQ1 Applications
There are a lot of Texas Instruments LP8860AQVFPRQ1 LED Driver ICs applications.
Medical surgery lighting
Down lights
Ultraviolet (UV) and Infrared (IR) Irradiation Devices
Auxiliary lights for on-vehicle cameras
LED backlight driver for LCD displays for Tablets and Note PCs