Welcome to Hotenda.com Online Store!

logo
userjoin
Home

LT1030CD

LT1030CD

LT1030CD

Texas Instruments

14 Terminations5V 14 Pin LT1030 Receivers4/0 Drivers/Receivers4 Functions

SOT-23

LT1030CD Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Weight 129.387224mg
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type Driver
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology BIPOLAR
Voltage - Supply 5V~15V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 12V
Terminal Pitch 1.27mm
Base Part Number LT1030
Pin Count 14
Operating Supply Voltage 5V
Nominal Supply Current 1mA
Data Rate 120 kbps
Output Characteristics 3-STATE
Differential Output NO
Output Polarity INVERTED
Protocol RS232
Input Characteristics STANDARD
Max Dual Supply Voltage 15V
Number of Drivers/Receivers 4/0
Min Dual Supply Voltage 5V
Interface Standard EIA-232-F; TIA-232-F
Number of Drivers 4
Negative Supply Voltage-Nom -12V
Supply Voltage1-Nom 12V
Output Low Current-Max 0.00002A
Out Swing-Min 3.3 V
High Level Input Current-Max 0.00002A
Height 1.75mm
Length 8.65mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $1.607690 $1.60769
10 $1.516689 $15.16689
100 $1.430839 $143.0839
500 $1.349848 $674.924
1000 $1.273441 $1273.441
LT1030CD Product Details

LT1030CD Overview


This driver chip is excellent for driving common LEDs due to its enhanced 14-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tube package.Since this is a Driver can transceiver, many solutions can use it for a variety of functions.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.It takes 5V~15V from the power supply to run this differential driver.As many as 4/0 eligible receivers/drivers can be used simultaneously with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.An operating voltage range of 12V is suitable for this line driver ic.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 14-pin layout that follows the market standard.Since the base part number LT1030 describes the product type, temperature, package, etc., you might get more options by searching with it.Wide receiver with enhanced power dissipation control, 14-pin.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.On the part, 4 drivers are embedded in order to facilitate the operation of the device.A temperature above -12V is recommended for the operation of the line driver ic.integrator circuits like this one have a maximum dual supply voltage configuration of up to 15V.You should use a power supply with a 5V output when this can transceiver features dual supply voltage.

LT1030CD Features


Tube package
14 pin count
14 pins

LT1030CD Applications


There are a lot of Texas Instruments LT1030CD Drivers/Receivers/Transceivers applications.

  • LAN, SAN, WAN (local, storage, work area networks)
  • Point-to-point networking
  • Servers
  • Laser diode bonding
  • Portable radio
  • SONET/SDH Network
  • IPTV front end
  • Wireless multimedia center in smart home
  • Wireless access points
  • interconnection between computers

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News