ONET2501PARGTTG4 Overview
It is packaged in an VQFN-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3.3V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 16 pins. A supply current of 32mA can be used to operate this linear amplifier. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 3 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3.3V. It is important to keep in mind that the power supply voltage of this electric component is below 3.6V, which is suitable. Keeping the linear amplifier's supply voltage above 3V is recommended. There is a telecom IC type ATM/SONET/SDH SUPPORT CIRCUIT used in the instrumentation amplifier.
ONET2501PARGTTG4 Features
16 Pins
supply voltage of 3.3V
ONET2501PARGTTG4 Applications
There are a lot of Texas Instruments
ONET2501PARGTTG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
