1 Channels 10mA per Channel 0.5pA 94 dB Instrumentational OP Amps 0.000002μA 10V~36V ±5V~18V OPA124 8 Pins 8-SOIC (0.154, 3.90mm Width)
SOT-23
OPA124UAE4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Lifecycle Status
LIFEBUY (Last Updated: 2 days ago)
Contact Plating
Gold
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Number of Pins
8
Operating Temperature
-25°C~85°C
Packaging
Tube
Series
Difet®
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Last Time Buy
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
8
ECCN Code
EAR99
Subcategory
Operational Amplifier
Max Power Dissipation
750mW
Technology
BIPOLAR
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
15V
Base Part Number
OPA124
Pin Count
8
Number of Channels
1
Operating Supply Current
2.5mA
Nominal Supply Current
3.5mA
Power Dissipation
750mW
Output Current
10mA
Slew Rate
1.6V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
General Purpose
Common Mode Rejection Ratio
94 dB
Current - Input Bias
0.5pA
Voltage - Supply, Single/Dual (±)
10V~36V ±5V~18V
Output Current per Channel
10mA
Input Offset Voltage (Vos)
500μV
Bandwidth
1.5MHz
Neg Supply Voltage-Nom (Vsup)
-15V
Unity Gain BW-Nom
1500 kHz
Voltage Gain
125dB
Average Bias Current-Max (IIB)
0.000002μA
Low-Offset
YES
Frequency Compensation
YES
Voltage - Input Offset
150μV
Low-Bias
YES
Micropower
NO
Bias Current-Max (IIB) @25C
0.000002μA
Programmable Power
NO
Dual Supply Voltage
15V
Nominal Gain Bandwidth Product
1.5MHz
Max I/O Voltage
500μV
Height
1.75mm
Length
4.9mm
Width
3.91mm
Thickness
1.58mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
OPA124UAE4 Product Details
OPA124UAE4 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -25°C~85°C. As long as the supply current of the chip does not exceed 2.5mA, this op amp ic can operate. Voltage gain should remain at 125dB. As far as the device is concerned, buffer amplifier has 1 channels. Difet? corresponds to the op amp's series.
OPA124UAE4 Features
8 Pins supply voltage of 15V 125dB voltage gain
OPA124UAE4 Applications
There are a lot of Texas Instruments OPA124UAE4 Instrumentational OP Amps applications.