OPA177GS Overview

There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. 8 pins are located on the operational amplifiers. The input offset voltage is 20μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 1.3mA . It is recommended to keep the voltage gain at 135.56dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 18V. It is recommended that you use an 1.3mA power supply with this electrical part in order for it to operate correctly. Under 22V is the minimum supply voltage for this electric component. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 22V. On the linear amplifier, there are 1 amplifiers.

OPA177GS Features

135.56dB voltage gain

OPA177GS Applications

There are a lot of Texas Instruments
OPA177GS Instrumentational OP Amps applications.

• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation