OPA2251UAG4 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. You can run this op amp ic on 27μA . The voltage gain should stay at 120dB. On the output type, there are Rail-to-Rail different types of op amps. The linear amplifier consists of 2 different elements in total. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
OPA2251UAG4 Features
8 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
OPA2251UAG4 Applications
There are a lot of Texas Instruments OPA2251UAG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Gaming industry
- Strain gauges
- Oscilloscopes
- Proportional operation circuits
- Signal operation
- Power control
- Micro signal measurement
- Fission chambers
- Inverse/same-phase proportional circuit
