OPA2364AIDR Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 3.6V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 2.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using a supply current of 1.1mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. Buffer op amp is equipped with 2 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 2.75V. For the packing of the instrumentation amplifier, TR is adopted.

OPA2364AIDR Features

8 Pins
supply voltage of 3.6V
100dB voltage gain
Output Type: Rail-to-Rail

OPA2364AIDR Applications

There are a lot of Texas Instruments OPA2364AIDR Instrumentational OP Amps applications.

• Signal operation
• Precision measurement
• Weighing systems
• Large motor controllers
• Displayers for aircraft and air transportation control systems
• Automatic control
• Proportional counter tubes
• Mobile phone
• Test equipment
• Hand-held batteries