OPA2364IDRG4 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 3.6V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 900μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . As long as the supply current of the chip does not exceed 1.1mA, this op amp ic can operate. You should keep the voltage gain at 100dB for the time being. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 2.75V voltage. For the packing of the instrumentation amplifier, TR is adopted.
OPA2364IDRG4 Features
8 Pins
supply voltage of 3.6V
100dB voltage gain
Output Type: Rail-to-Rail
OPA2364IDRG4 Applications
There are a lot of Texas Instruments OPA2364IDRG4 Instrumentational OP Amps applications.
- Semiconductor detectors
- Instrumentation
- pH (acidity)
- Communication
- Ultrasound transducers
- Thermocouples
- Integrator circuits
- Weighing systems
- Proportional operation circuits
- Scintillation detectors
