OPA27GP Overview

Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 25μV voltage. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 3.3mA . There should be no change in the voltage gain at 124dB. The op amp ic has 1 channels on it. The operating supply voltage of the buffer op amp is rated at 22V.

OPA27GP Features

8 Pins
supply voltage of 15V
124dB voltage gain

OPA27GP Applications

There are a lot of Texas Instruments OPA27GP Instrumentational OP Amps applications.

• Communication device
• Proportional counter tubes
• Inverse/same-phase proportional circuit
• Navigation
• Test and measurement instruments
• Industrial control system
• Portable docking station
• Micro signal measurement
• Gaming industry
• Power generator