OPA453FAKTWT Overview

The linear amplifier is packaged in a TO-263-8, D2Pak (7 Leads + Tab), TO-263CA case. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Cut Tape (CT) case. There have been a total of 7 terminations over the past year. There are a total of 7 pins on this op amp. As a reminder, this buffer op amp should be powered by 40V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 7-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 3mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 5.5mA and 10 . You should keep the voltage gain at 110dB for the time being. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 40V. This linear amplifier pack is based on the TR axis.

OPA453FAKTWT Features

7 Pins
supply voltage of 40V
110dB voltage gain

OPA453FAKTWT Applications

There are a lot of Texas Instruments OPA453FAKTWT Instrumentational OP Amps applications.

• Large motor controllers
• Laptop
• Oscilloscopes
• Polarized electrodes
• Portable docking station
• Radar
• Broadcasting
• Automotive sensors
• Proportional counter tubes
• Television