Welcome to Hotenda.com Online Store!

logo
userjoin
Home

OPA727AIDGKTG4

OPA727AIDGKTG4

OPA727AIDGKTG4

Texas Instruments

40mA per Channel 85pA 86 dB Instrumentational OP Amps 0.0005μA 6V 4V~12V ±2V~6V OPA727 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

SOT-23

OPA727AIDGKTG4 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series e-trim™
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number OPA727
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 6V
Number of Elements 1
Operating Supply Current 4.3mA
Nominal Supply Current 6.5mA
Output Current 40mA
Slew Rate 30V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 86 dB
Current - Input Bias 85pA
Voltage - Supply, Single/Dual (±) 4V~12V ±2V~6V
Output Current per Channel 40mA
Input Offset Voltage (Vos) 300μV
Bandwidth 20MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 20000 kHz
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.0005μA
Power Supply Rejection Ratio (PSRR) 90.46dB
Low-Offset YES
Frequency Compensation YES
Voltage - Input Offset 15μV
Low-Bias YES
Micropower NO
Programmable Power NO
Nominal Gain Bandwidth Product 20MHz
Max I/O Voltage 150μV
Length 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
OPA727AIDGKTG4 Product Details

OPA727AIDGKTG4 Overview


In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 300μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 4.3mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 120dB for the time being. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 6V. The linear amplifier is packaged by using a TR axis. In this case, e-trim™ represents the instrumentation amplifiers' series number.

OPA727AIDGKTG4 Features


8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail


OPA727AIDGKTG4 Applications


There are a lot of Texas Instruments
OPA727AIDGKTG4 Instrumentational OP Amps applications.


  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
  • Signal filtering
  • Signal operation
  • Video computer boards

Related Part Number

LMV821IDBVTG4
NJM4560D
TLV2254QDG4
MAX4402AUA-T
MAX4041ESA
MAX4041ESA
$0 $/piece
MAX4490AUK
MAX4490AUK
$0 $/piece
OPA4344UAG4

Get Subscriber

Enter Your Email Address, Get the Latest News