PGA204BU/1KE4 Overview
In the package, you will find a SOIC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the INSTRUMENTATION AMPLIFIER-type. A Tape and Reel case is used for delivering the op amp. During the past two weeks, there have been close to 16 terminations. A total of 16 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 16 pins on it. Op amp rates 50μV as input offset voltage. You should keep the voltage gain at 60dB for the time being. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. 3 elements make up the design of this buffer amplifier. This electric component can work from a voltage of under 36V as far as supply voltage is concerned. A voltage of 9V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part. The current is quiescent at 5.2mA. During testing, the instrumentation amplifier resistance should remain within a range of 10GOhm.
PGA204BU/1KE4 Features
16 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm
PGA204BU/1KE4 Applications
There are a lot of Texas Instruments
PGA204BU/1KE4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
