The Tape & Reel (TR) method is used for packaging clock ICs. In the 20-SSOP (0.209, 5.30mm Width) package, there is an embedded clock generator. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. It contains 20 terminations that can be found in frequency synthesizer. Basically, a voltage of 5V should be applied to this electronic frequency generator. TTL is designed as this clock generator's input. 1 circuits are used to achieve clock PLL's superior flexibility. RF synthesizers based on this clock provide frequencies up to 36.87MHz maximum. Because of the Surface Mount, clock PLL can be easily mounted on the panel. There are 3.3V 5V available for use with this clock PLL. The ambient temperature should be set at -25°C~85°C, which is estimated by the test statistics. There are several logic levels in CMOS logic that can be used with this clock generator. PLL Multi-Clock Generator is the type of electrical part that this component is classified as. This clock-generating IC is a 20-bit device designed explicitly for microprocessors. This part number PLL1700 is related to the following electrical components. There are 20 pins on the frequency generator that are available for use. The maximum supply voltage that analog clock generator can handle is 5V. Fundamentally, this is a kind of Clock Generators clock PLL. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO REQUIRES 3.3V SUPPLY. I have designed a frequency synthesizer that has 2 elements and a low amount of jitter.
PLL1700EG/2K Features
Available in the 20-SSOP (0.209, 5.30mm Width) Supply voltage of 5V Operating supply voltage of 5V
PLL1700EG/2K Applications
There are a lot of Texas Instruments PLL1700EG/2K Clock Generators applications.