As a clock IC, PLLs is packaged using the Tube method. This clock generator is embedded in the 20-SSOP (0.154, 3.90mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 20 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. It is designed that the Clock PLL's input should be CMOS, Crystal. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 36.864MHz, this clock-based RF synthesizer is suitable for a variety of applications. This component can be conveniently installed on the panel thanks to the Surface Mount. As long as there are 2.7V~3.6V supply voltages provided, clock generator ic should work. By calculating the test statistics, -25°C~85°C is the appropriate ambient temperature. This is a clock generator compatible with CMOS logic levels. It has been classified as a PLL Multi-Clock Generator electronic part, which means that it is a semiconductor. In particular, this clock PLL is designed to be used with microprocessors. These related electrical parts are available for the base part number PLL1707. There are 20 pins on the frequency generator that are available for use. There is a maximum supply voltage of 3.3V that this analog clock generator can handle. As such, it is often referred to as a kind of Clock Generators clock PLL. 6 signal outputs maximi6e the output frequency. At frequencies of 27.27MHz, RF synthesizer achieves high efficiency. For the clock time generator to function properly, 19mA of supply current must be provided. I have designed a frequency synthesizer that has 2 elements and a low amount of jitter. This RF synthesizer operation requires a maximum current of 25mA.
PLL1707DBQ Features
Available in the 20-SSOP (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
PLL1707DBQ Applications
There are a lot of Texas Instruments PLL1707DBQ Clock Generators applications.