PLL1707DBQR Overview

It is packaged using the Tape & Reel (TR) method since it is a clock IC. A Clock PLL is included with the 20-SSOP (0.154, 3.90mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 20 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. This Clock PLL will be fed by CMOS, Crystal as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. The frequency generator has a maximum frequency of 36.864MHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock PLL works with 2.7V~3.6V supply voltage provided. Based on the test statistics, an ambient temperature of -25°C~85°C should be set. In this case, we are dealing with a frequency synthesizer that can be used with CMOS logic levels. A PLL Multi-Clock Generator is a classification for the electronic part in question. In this IC, a 20-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. It is possible to connect to the frequency generators via 20 pins. This time clock generator can handle a voltage of 3.3V as its supply voltage. Clock generator can also be included into Clock Generators. I have designed a frequency synthesizer that has 2 elements and a low amount of jitter.

PLL1707DBQR Features

Available in the 20-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

PLL1707DBQR Applications

There are a lot of Texas Instruments PLL1707DBQR Clock Generators applications.

• Small signal recovery
• Automatic control
• Melting
• Time to digital converters
• FMCW Radar
• Signal modulation and demodulation
• Main oscillator in receiver
• Signal analyzer
• Test and instrumentation equipment
• Ports