REG104GA-2.5/2K5G4 Overview
In order to package the IC voltage regulator, a SOT-6 case is used. There are 6 terminations on the battery regulator IC chip and each of them has its own function. In this case, Fixed represents the output type of the Voltage Regulated IC. The current output of this IC regulator is 1A. On this chip, there are a total of 6 pins in total. There are 1 outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. There is a dropout voltage of 10 volts on this IC regulator. Chips have 6 pins. In terms of components, this is an example of a Other Regulators component. As you can see from the picture, the regulator IC is packed in a certain way. In order to meet the operation requirements, its maximal output current reaches 1A. It operates in the 600μA Quiescent Current state. In the event that the temperature in your room falls below 85°C, then this feature should be used at such a time. There is no operating temperature below -40°C for the chip. In general, this voltage regulator IC will output 2.5V volts when used as a system part. There is a specification within 1.295V volts for its voltage reference characteristic.
REG104GA-2.5/2K5G4 Features
230mV dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing
The maximum operating temperature of -40°C
Reference of 1.295V voltage
REG104GA-2.5/2K5G4 Applications
There are a lot of Texas Instruments REG104GA-2.5/2K5G4 Linear Voltage Regulators applications.
- TVS diodes
- IO devices
- Pumps
- Motor controllers
- Laboratory
- Voltage tracker protection circuits
- Camera
- xEV
- SCP configurator
- Medical Applications: Diagnostics and Imaging
