SA555DR Overview

In the packaging, the clock timer is enclosed with the 8-SOIC (0.154, 3.90mm Width) code on the back. In this case, the frequency of the programmable timer is set to 100kHz.It is used to pack in Cut Tape (CT) case. Type Surface Mount mounting is recommended.Programmable timers can provide 4.5V~16V voltages.The type of chips can be divided into 555 Type, Timer/Oscillator (Single). The operating temperature of this timer clock is -40°C~85°C. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 10mA voltage. It is based on SA555. The timer clock contains 8 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 8 . The number of the chip's terminations sums up to 8. Its subcategory belongs to Analog Waveform Generation Functions. The timer clock has 72.603129mg in weight. The timer clock runs quiescent current at 15mA. The number of Timers/Counters on the device is 1.

SA555DR Features

Operate frequency at 100kHz
Package / Case: Cut Tape (CT)
Mounting Type:Surface Mount
Quiescent Current at 15mA
1 Timers/Counters

SA555DR Applications

There are a lot of Texas Instruments SA555DR Programmable Timers & Oscillators applications.

• Motor control
• Always On Systems
• Power-Gating Applications
• Consumer Electronics
• Building Automation
• Remote Sensors
• Delay circuits
• High Vibration, High Acceleration Environments
• Battery Powered Systems
• Domestic appliances