The switching controller fits in the 16-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 8V~40V voltage are supplied and operated. Suitable for work in a -25°C~85°C TA dc switcher. It can switch at 450kHz. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 16. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 20V. Other relevant dc to dc converter ics can be found by searching "SG2524". There are only 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. It is recommended that the dc dc voltage regulator's minimum input voltage be 8V. DC regulator outputs 18V voltage according to the test statistics. It should be fully noted that the dc to dc regulator only accepts 40V input voltage at most. You should note that the dc dc regulator's usual output current is 50mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. 722kHz is the frequency of the switching controller.
SG2524DRG4 Features
Transistor Driver Outputs Switching Frequency: 450kHz Current Limit, Frequency Control PULSE WIDTH MODULATION Max Duty Cycle: 45 % Frequency: 722kHz
SG2524DRG4 Applications
There are a lot of Texas Instruments SG2524DRG4 DC to DC converter applications.