SG3524NSR Overview

With a 16-SOIC (0.209, 5.30mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 8V~40V. Qualified to work in an dc switcher with 0°C~70°C TA. Switching can be done at 450kHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Current Limit, Frequency Control is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 20V. Searching "SG3524" will return other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator must be 8V. Based on the test statistics, DC regulator outputs voltage 18V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 50mA. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. 722kHz is the frequency of the switching controller. Users should apply 40V to operate the voltage regulator dc to dc safely and reliably.

SG3524NSR Features

Transistor Driver Outputs
Switching Frequency: 450kHz
Current Limit, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 722kHz

SG3524NSR Applications

There are a lot of Texas Instruments SG3524NSR DC to DC converter applications.

• Post equipment
• Sink circuits
• Large fire protection systems
• Network technology
• Balance equipment
• Electric water heaters
• Geothermal power
• Product testing
• Experimental setup
• Hydraulic presses