SM320C31GFAM50 Overview

For its use, it has 141 terminations.The supply voltage is 5V.Pins are present on the 141 component.In its configuration, there are 141 pins.In order for the device to operate at 50MHz frequency, there is a specific design.The mounting method is Through Hole.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.This device can be powered by voltages as low as 4.75V.5.25V is the maximum voltage that can be supplied to this device.A voltage of 5V is used as the supply voltage.5V electric power supplies it.DIGITAL SIGNAL PROCESSOR, OTHER is used as the uPs/uCs/peripheral IC type.125°C should be lower than the operating temperature.Temperatures should exceed -55°C during operation.2 timers are used in industrial environments to provide accurate feedback and event activation.A source external to the system causes 4 interrupts.Its maximum frequency should be kept below 50MHz.In order to transfer data without overloading the CPU, 1 DMA channels are used.Serial 1 I/Os are used to communicate data between devices.

SM320C31GFAM50 Features

Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts

SM320C31GFAM50 Applications

There are a lot of Texas Instruments
SM320C31GFAM50 DSP applications.

• Radar
• Seismology
• Audio
• Sonar
• Voice recognition
• Financial signals
• Other sensor array processing
• Spectral density estimation
• Statistical signal processing
• Digital image processing, data compression