SM320C80GFM50 Overview

There are 305 terminations for its uses.It operates with the supply voltage of 3.3V.There are 305 component pins.305 pins can be found in its configuration.It is specifically designed to operate with the frequency of 50MHz.It adopts Through Hole as its mounting way.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.The minimum voltage supplied to this device is as low as 3.135V.The maximum voltage supplied to this device amounts to 3.465V.It operates with the supply voltage of 3.3V.It employs DIGITAL SIGNAL PROCESSOR, OTHER as its uPs/uCs/Peripheral ICs type.The operating temperature should be lower than 125°C.The operating temperature should be in excess of -55°C.There are 3 timers programmed to provide accurate feedback and event activation in industrial environments.There are 4 interrupts caused by an external source.The maximum value of its frequency should be kept below 50MHz.There are 1 DMA channels used to transfer data without exposing the CPU to a work overload.

SM320C80GFM50 Features

Operating supply voltage of 3.3V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts

SM320C80GFM50 Applications

There are a lot of Texas Instruments
SM320C80GFM50 DSP applications.

• Audio signal
• Speech processing
• Radar
• Seismology
• Audio
• Sonar
• Voice recognition
• Financial signals
• Other sensor array processing
• Spectral density estimation