This driver chip is excellent for driving common LEDs due to its enhanced 10-VFDFN Exposed Pad package.Tape & Reel (TR) package is used to mount this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 3V~3.6V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~125°C.With a voltage range of 3.3V, this driver IC can operate efficiently.In order to drive and receive signals from data, this wide receiver has 10 terminations integrated.Since the part number 65HVD01 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control is provided by this 10-pin driver IC.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 3.3V.There are 1 transceivers in total implemented by this IC.With an input voltage of 1.1mA, this integrating circuit has the ability to drive LEDs with an output voltage of 1.1mA.With the help of this bluetooth transceiver, you will be able to provide an output current of 80mA.
SN65HVD01DRCT Features
Tape & Reel (TR) package 10 pins
SN65HVD01DRCT Applications
There are a lot of Texas Instruments SN65HVD01DRCT Drivers/Receivers/Transceivers applications.