Designed for common LEDs, this driver IC features an enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The package of this receiver is Tube.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.This wide receiver can be placed on any Surface Mount-type PCB or development board.It takes 4.5V~5.5V from the power supply to run this differential driver.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.Wide receiver can operate within the range of 5V supply voltages efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.Since the base part number 65HVD485 describes the product type, temperature, package, etc., you might get more options by searching with it.It is a 8-pin driver IC with enhanced power dissipation controls.It was possible to achieve a 1-bit resolution through this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.The module isolated transceiver implements a total of 1 transceivers.Using a 2mA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.
SN65HVD485EDGK Features
Tube package 8 pin count 8 pins 5V power supply
SN65HVD485EDGK Applications
There are a lot of Texas Instruments SN65HVD485EDGK Drivers/Receivers/Transceivers applications.