This driver chip is excellent for driving common LEDs due to its enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.There is a Cut Tape (CT) package for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.A differential driver like this uses 3V~3.6V of power.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.For applications where the operating temperature is -40°C~125°C, this ic receiver was designed primarily.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.With the part number 65HVD75 identifying the product type, temperature, package, etc., you can search with it to see more variants.This is a 8-pin driver IC with enhanced power dissipation control.There are typically 1 bits of resolution specified in the specifications of this receiver.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 3.3V.There is a subcategory called Line Driver or Receivers for this rf transceiver module.The integrator circuit comes with embedded 1 drivers.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 0.95mA.An input voltage of 950μA is recommended for this integrating circuit to be able to drive LEDs.In addWide receiverion to delivering voltage at 2V, Wide receiver also has the abilWide receivery to measure voltage.With the help of this bluetooth transceiver, you will be able to provide an output current of 160mA.
SN65HVD75DGKR Features
Cut Tape (CT) package 8 pins
SN65HVD75DGKR Applications
There are a lot of Texas Instruments SN65HVD75DGKR Drivers/Receivers/Transceivers applications.