With the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.In the Tape & Reel (TR) package, this receiver is mounted.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.The wide receiver can be mounted on any Surface Mount-type PCB or development board.It takes 4.5V~5.5V from the power supply to run this differential driver.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.An operating voltage range of 5V is suitable for this line driver ic.8 terminations are integrated into this wide receiver for driving and receiving signals from data.With the part number 65HVD82 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation control driver IC featuring 8 pins.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.This receiver is typically specified with a resolution of 1 bits. An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory called Line Driver or Receivers for this rf transceiver module.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.ICs implement a total of 1 transceivers.Input current should not exceed 0.9mA at the VCC pin of the ic receiver.An input voltage of 900μA is recommended for this integrating circuit to be able to drive LEDs.
SN65HVD82DR Features
Tape & Reel (TR) package 8 pins 5V power supply
SN65HVD82DR Applications
There are a lot of Texas Instruments SN65HVD82DR Drivers/Receivers/Transceivers applications.