SN65LVDS100D Overview

As a convenience to the user, power buffer has been packaged in 8-SOIC (0.154, 3.90mm Width).Currently, this power buffer is available for shipping in Tube packages.A universal mounting system for easy adaptation.In terms of types, this is a typical Buffer, ReDriver.There is no voltage involved in the operation of this op amp buffer.Input is facilitated by CML, LVDS, LVPECL.To avoid malfunctions, you should set the operating temperature to -40°C~85°C.To get more pin-to-pin solutions for your special needs, try searching a higher letter such as "65LVDS100" instead of "s".A 8 terminal can be found on the op amp buffer.Temperature 260 is its peak reflow temperature.3.3V voltage enables the splitter to handle a wide range of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 8 pins that it has.It outputs the value in z-axis.Pins on its 8 axis are present.The Surface Mount on the board allows it to be mounted on PCBs or other boards.There are other Line Driver or Receivers's in the industry that play a significant role, like the power buffer.In order for this power buffer to operate, a voltage of 30mA must be applied.The operating supply voltage of 3.3V is required for normal operation.Using 1-Bits as the receiver, it transmits data.This splitter dissipates 481mW of power at most.A 1 element interface repeater signal such as this is used.Currently, the spliter should output 12μA.

SN65LVDS100D Features

A standard Line Driver or Receivers.
1-Bit receiver.

SN65LVDS100D Applications

There are a lot of Texas Instruments SN65LVDS100D Signal Buffers, Repeaters, Splitters applications.

• Medical
• Cable Repeaters
• Network Switches/Routers
• Cellular Phone Base Stations
• Clock Distribution
• Protection Switching
• Multidrop Buses
• DSLAMs
• Add/Drop Muxes
• Digital Crossconnects