SN65LVDS100DGKG4 Overview

This power buffer comes in a convenient 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package for convenient transportation.Currently, this power buffer is available for shipping in Tube packages.Surface Mount Universal mout to make it easier for you to adjust.As far as types go, this is a typical Buffer, ReDriver.It uses 3V~3.6V voltage for its operation, so it does not require batteries.CML, LVDS, LVPECL input is enabled.If you want to avoid malfunctions, you need to set the operating temperature to -40°C~85°C.To get more pin-to-pin solutions for your special needs, try searching a higher letter such as "65LVDS100" instead of "s".There is a 8 terminal on the op amp buffer, which can be seen in the picture below.There is a maximum reflow temperature of 260 for the op amp buffers.It is a splitter that can accomplish a wide range of demanding tasks with power supplied by 3.3V voltage.Power buffer pinouts start from 8 pins.LVDS capacitance for the input.There are 8 pins on it.A mounting hole is provided for mounting on PCBs and other boards.A power buffer like the power buffer plays a crucial role in the industry.There is a voltage of 30mA which is used to power this power buffer.Normal operation requires 3.3V operating supply voltage.Using 1-Bits as the receiver, it transmits data.It dissipates a maximum of 377mW watts of power.The splitter should operate at 31mA nominal supply current under normal circumstances.The repeater signal is an interface with a 1 element.The spliter's current output is 12μA.

SN65LVDS100DGKG4 Features

A standard Line Driver or Receivers.
1-Bit receiver.

SN65LVDS100DGKG4 Applications

There are a lot of Texas Instruments SN65LVDS100DGKG4 Signal Buffers, Repeaters, Splitters applications.

• Test Equipment
• Industrial PCs
• Communications Switchers
• PECL-to-LVDS Translation
• Servers
• Network Switches/Routers
• Add/Drop Muxes
• Network Switches/Routers
• Cable Repeaters
• Loopback