SN65LVDS104D Overview

The package is packed in 16-SOIC (0.154, 3.90mm Width) for convenient transportation of power buffer.Packaged in Tube ready for power buffer.Surface Mount A universal mout for easy adaptation to a wide range of heads.As for types, this is your typical Buffer, Multiplexer.During the operation of this op amp buffer, 3V~3.6V voltage is used.The output quality is maintained by 1 x 1:4 channels.LVDS input is enabled.For optimal performance, set the operating temperature to -40°C~85°C.There are more pin-to-pin solutions available for your special needs if you search with the letter "65LVDS104".The op amp buffer has 16 terminals that you can find on the side.Reflow temperature at its peak is calculated to be 260.The splitter is able to perform many demanding tasks when provided with 3.3V voltage.This power buffer has 16 pins as its pinout.There are 16 pins on it.A Surface Mount hole is available for mounting it on a PCB or another board.In the industry, Line Driver or Receivers's such as this power buffer have an important role to play.Voltage 23mA is needed to operate this power buffer.It is necessary for 3.3V operating supply voltage to function normally.1-Bit receiver is used.The splitter dissipates at most 950mW watts.Normal use of the splitter requires 23mA as the nominal supply current.4 outputs can be output by it.

SN65LVDS104D Features

1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.

SN65LVDS104D Applications

There are a lot of Texas Instruments SN65LVDS104D Signal Buffers, Repeaters, Splitters applications.

• Cellular Phone Base Stations
• Backplane Interconnect
• Cable Repeaters
• Servers
• Clock Distribution
• SATA SSDs or HDDs
• Digital Crossconnects
• Multidrop Buses
• Industrial PCs
• Network Switches/Routers