SN74166N Overview

PDIP is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. The part operates at 5V voltage. It is equipped with a pin count of 16. It is recommended that the mount should be done by Through Hole. There is an electronic component in the TTL/H/L. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: CLOCK INHIBIT. Devices with voltage delivery capabilities of 5V are available. A total of 8 bits are present on the IC chip. It has a total of zero pins. At temperatures below 70°C, it is recommended for use. Ideally, it should not fall below 0°C. A voltage of 5.25V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 4.75V.

SN74166N Features

With 16 pins
Operate supply voltage at 5V
It supplies 5V power

SN74166N Applications

There are a lot of Texas Instruments
SN74166N Shift Registers applications.

• Data Processors
• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter
• Data manipulation
• Delay Line
• Generate time delay toward digital circuits
• Parallel data