SN74ABT273DWRG4 Overview
SOICis the way it is packaged. TTLis the output configured for it. In total, it contains 1 elements. There are 20 terminations,Power is supplied from a voltage of 5V volts. ABTis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The system runs on a power supply of 5V watts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There is -32mA output current at the high level. There is 64mA output current at the low level. It is recommended that the operating temperature be lower than 85°C. A temperature above -40°Cshould be used for the operation. Initially, it requires a voltage of 4.5V as the minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. 150MHzis the maximum frequency that can be achieved. This logic IC is D FLIP-FLOP. A total of 1 functions are provided by this T flip flop. With 20 pins, it is equipped with a low power consumption. As a result of the output current of 64mA, the design flexibility is maximized.
SN74ABT273DWRG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74ABT273DWRG4 Applications
There are a lot of Texas Instruments
SN74ABT273DWRG4 Flip Flops applications.
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
