SN74ABT374APWG4 Overview
It is packaged in the way of TSSOP. The output it is configured with uses TTL. D latch consists of 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered from a supply voltage of 5V. This D flip flop belongs to the family of ABT. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. This D flip flop is well suited for TUBE based on its reliable performance. It operates from 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage should be maintained at 5V for high efficiency. The high level output current is set to -32mA. The low level output current is set to 64mA. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. It operates with the minimal supply voltage of 4.5V. It supports the maximal supply voltage of 5.5V. The frequency that can be achieved is 200MHz. The logic IC it adopts is BUS DRIVER. It is equipped with 1 Functions . It is equipped with 20 pin count. The output current of 64mA makes it feature maximum design flexibility.
SN74ABT374APWG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74ABT374APWG4 Applications
There are a lot of Texas Instruments
SN74ABT374APWG4 Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
