SN74ABT377ADW Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). The package Tubecontains it. T flip flop uses Non-Invertedas the output. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74ABTseries contain this type of chip. Its output frequency should not exceed 150MHz. In total, it contains 1 elements. During its operation, it consumes 250μA quiescent energy. Currently, there are 20 terminations. The 74ABT377 family contains this object. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 3.5pF farads at the input. In this case, the D flip flop belongs to the ABTfamily. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 20. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. The superior flexibility of this product is achieved by using 8 circuits. The D latch runs on a voltage of 5V volts. High efficiency requires the supply voltage to be maintained at 5V. The output current of 64mA makes it feature maximum design flexibility. It is also characterized by WITH HOLD MODE.

SN74ABT377ADW Features

Tube package
74ABT series
20 pins
8 Bits
5V power supplies

SN74ABT377ADW Applications

There are a lot of Texas Instruments SN74ABT377ADW Flip Flops applications.

• Synchronous counter
• Bus hold
• Communications
• Dynamic threshold performance
• Supports Live Insertion
• Set-reset capability
• Buffered Clock
• Test & Measurement
• Latch-up performance
• Data Synchronizers