SN74ABTH16823DLG4 Overview
The flip flop is packaged in a case of 56-BSSOP (0.295, 7.50mm Width). It is contained within the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74ABTH series. A frequency of 150MHzshould be the maximum output frequency. The list contains 1 elements. There is a consumption of 500μAof quiescent energy. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74ABTH16823 family contains this object. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 4pF farads at the input. A device of this type belongs to the family of ABT. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 56. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V. Its flexibility is enhanced by 2 circuits. An electrical current of 5V volts is applied to it. This flip flop has a total of 2ports. There are 3 output lines on it.
SN74ABTH16823DLG4 Features
Tube package
74ABTH series
56 pins
5V power supplies
SN74ABTH16823DLG4 Applications
There are a lot of Texas Instruments SN74ABTH16823DLG4 Flip Flops applications.
- Divide a clock signal by 2 or 4
- Automotive
- ESD performance
- High Performance Logic for test systems
- CMOS Process
- ESCC
- Modulo – n – counter
- Instrumentation
- Balanced 24 mA output drivers
- Functionally equivalent to the MC10/100EL29
