The PDIP package is neat. In order to package this voltage buffer, the Rail/Tube external package is used. We use all 2 elements. The ethernet transceiver has 20 terminations with different functions. There is a voltage requirement of 3.3V. Electronic parts from the AC family are used in this part. A total of 20 pins are included with the electric component. This logical driver can be used in Through Hole different applications. The pin count is 20. 2 ports are included in this logic device. Bus Driver/Transceivers is a specific type of buffer. As long as the electronic component is in the quiescent state, it uses 4μA. Use a 3.3/5V power supply if possible. The electronic component contains 4 efficient bits that are included in the package. A high-quality communication channel is provided by 8 channels in this logic IC. Operating temperatures as low as -40°C are possible. No more than 85°C should be the ambient temperature when automotive buffer is operating. In its low-level output mode, it outputs 24mA. When operating in high-level output mode, the electronic component can conduct up to -24mA. At the very least, the voltage used to operate this electrical component should be at least 2V. There is a 6V maximum supply voltage rating on it. BUS DRIVER logic ICs are called that. The inputs of this buffer IC are 4. Under ENABLE LOW control, the logical driver starts up.
SN74AC240NE4 Features
Bus Driver/Transceivers High Level Output: 24mA Low Level Output: -24mA BUS DRIVER Logic IC
SN74AC240NE4 Applications
There are a lot of Texas Instruments SN74AC240NE4 Buffers & Transceivers applications.