SN74AC533N Overview

In the 20-DIP (0.300, 7.62mm) package, it is embedded. Packaged in the way of Tube. In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. Electronic components are mounted using the Through Hole method. There is no supply voltage for this device. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74AC series. It is designed with 8 bits. In this device, there are 20 terminations. As a member of the 74AC533 family, it falls under that category. With a supply voltage of 3.3V, it operates. It is equipped with 20 pin count. This electronic device is categorized as a AC electronic device. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Through Hole. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. It reaches a maximum supply voltage (Vsup) of 6V. 3.3/5V power supplies are needed to operate it. There should be a voltage supply (Vsup) greater than 2V. It contains 8 input lines where electronic circuits are present. It features maximum flexibility in design due to 24mA output current.

SN74AC533N Features

20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC533 family
20 pin count
20 pins
3.3/5V power supplies

SN74AC533N Applications

There are a lot of Texas Instruments SN74AC533N Latches applications.

• Multi-line decoders
• Automotive ADAS
• Shift right with parallel loading
• Timers
• Counter timers
• Four-bit storage with output enable
• Shift left register
• Stacked or Push-Down Registers
• Synchronous frequency dividers
• Accumulator Registers